• Home
• Egitimler
• Hakkımda
• Iletisim
• NetSec Listesi
• Photos
• To_blog
• Yazılarım

« Web Saldırı Olayları Veritabanı - TR | Home | Log Dosyalarina Aktif Izleme »

Windows icin port yonlendirici

By Huzeyfe ONAL | June 5, 2007

Fpipe, Windows sistemlerde basit port yonlendirme amacli kullanilan basit bir program. TCP/UDP protokolleri icin istenilen sayida istegi karsilayip, belirtilen adrese yonlendiriyor. Yonlendirme esnasinda kaynak portu degistirme ozelligi de sunuyor. UNIX muadili rinetd kadar esnek olamasa da is Windows icin is gorecek kadar iyi..

Bu aralar fazlasi ile Windows sistemlerle bogustugumdan boyle ufak programciklar cok isime yariyor. Linux/UNIX ortamindan sonra Windows ortami networking konusunda cok yavan geliyor fpipe secenekleri.

C:\Documents and Settings\Huzeyfe\Desktop\fpipe2_1>FPipe.exe FPipe v2.1 - TCP/UDP port redirector. Copyright 2000 (c) by Foundstone, Inc. http://www.foundstone.com FPipe [-hvu?] [-lrs ] [-i IP] IP -?/-h - shows this help text -c - maximum allowed simultaneous TCP connections. Default is 32 -i - listening interface IP address -l - listening port number -r - remote port number -s - outbound source port number -u - UDP mode -v - verbose mode Example: fpipe -l 53 -s 53 -r 80 192.168.1.101 This would set the program to listen for connections on port 53 and when a local connection is detected a further connection will be made to port 80 of the remote machine at 192.168.1.101 with the source port for that outbound connection being set to 53 also. Data sent to and from the connected machines will be passed through.

Topics: Windows Security |

Comments